SN74LVC125APWR, буфер/драйвер не инвертирующий 4 х 3 КМОП кристалл

Описание SN74LVC125APWR The SN74LVC125APWR is a quadruple Bus Buffer Gate designed for 1.65 to 3.6V VCC operation. The SN74LVC125A device feature independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE) input is high. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor, the minimum value of the resistor is determined by the current-sinking capability of the driver. Inputs can be driven from either 3.3 or 5V devices. This feature allows the use of this device as a translator in a mixed 3.3/5V system environment. It is suitable for cable modem termination systems, point-to-point microwave backhaul, private branch exchanges (PBX), vector signal analyzers and generators. • Separate OE for all 4 buffers • Inputs accept voltage to 5.5V • Maximum tpd of 4.8ns at 3.3V • Latch-up performance exceeds 250mA per JESD 17 • ±50mA Continuous output current • ±100mA Continuous current through VCC or GND Серия74LVCТехнологияcmosТипbuffer/line driverПолярностьнеинвертирующийЧисло элементов4Количество Бит на Элемент1Тип выходаpush-pull(3-state)Выходной ток высокого уровня, IOH (мА)-24Выходной ток низкого уровня, IOL (мА)24Напряжение питания, В1.65…3.6Рабочая температура,°C-40…+125Корпусtssop-14(0.173 inch)Вес, г0.12