ADM1486ARZ, Интерфейс RS-485

Описание ADM1486ARZ The ADM1486ARZ is a Differential Line Transceiver suitable for high speed bidirectional data communication on multipoint bus transmission lines. It is designed for balanced data transmission, complies with EIA Standards RS-485 and RS-422 and is recommended for PROFIBUS applications. The part contains a differential line driver and a differential line receiver. Both the driver and the receiver may be enabled independently. When disabled or powered down, the driver outputs are high impedance. The ADM1486 operates from a single 5V power supply. Excessive power dissipation caused by bus contention or output shorting is prevented by short-circuit protection and thermal circuitry. Short-circuit protection circuits limit the maximum output current to ±200mA during fault conditions. A thermal shutdown circuit senses if the die temperature rises above 150°C and forces the driver outputs into a high impedance state under this condition. • 2.1V Minimum differential output with 54R termination • Low power 0.8mA ICC • Thermal shutdown and short-circuit protection • High impedance outputs with drivers disabled or power-OFF • Superior upgrade for SN65ALS1176 • 0.5ns Skew driver and receiver • 11ns Driver propagation delay • 12ns Receiver propagation delay Типrs422, rs485 приемопередатчикКоличество драйверов / приемников1/1Режим работыполудуплексГистерезис приемника, мВ70Скорость передачи данных30 mbpsНапряжение питания, В4.75…5.25Рабочая температура,°C-40…+85Корпусsoic-8(0.154 inch)Вес, г0.15